Electric Attachment Rebuild – $249
- We can perform a rebuild if the gearing of the handpiece is not worn and can be reused in the repair
- Complete disassembly and cleaning of the dental handpiece
- Inspect the head gear and drive shaft gearing for wear or blemishes during the disassembly process
- Replace the head bearings, drive shaft bearings, lower drive bearings, water line o-rings, and loading springs
Electric Attachment Overhaul – $399+
- A full overhaul (similar to a factory repair) includes replacement of all drive components in the handpiece including the head cartridge, drive shaft, gearing, bearings, o-rings, and loading springs
- Disassembly of the remainder of the non-moving parts and inspection for wear
- Reassembly of all parts and test for speed, concentricity, db (sound), heat and torque
Water Line Cleaning – $89
- Complete disassembly and cleaning of the dental handpiece
- Replacement of all o-rings on upper and lower water lines
- Reassembly of attachment
- Clean, lube, and test to make sure the handpiece works at the recommended manufacturers specifications and all leaks have ceased
Clean, Lubricate, and Test – $35
- If the handpiece does not need a full repair, we will clean the critical components (interior and exterior) and then lubricate and test the motor to ensure the motor runs to the manufacturer's specifications
Signs an Electric Handpiece Needs Repair
- Bur wobbling
- Failure to connect the attachment to the motor
- Handpiece making an unusual noise
- Head or body heating up
- Leaking water from the head or body
- Little or no bur rotation